Oct 26, 2011 MdRoofingServices Says:
Thanks for the comment.
Caulking over nail heads almost always fails over time -- and the temperature swing of shingles over metal causes the metal to reach very high temps -- causing expansion and contraction -- and bigger holes where the nail penetrates the aluminum. This develops into a big leak over time.
The Ice and Water actually remains soft and sticky and seals to the nail shafts, eliminating future leaks.
Hope it helps!
-Bill T-
Oct 4, 2011 appliaroofNtx Says:
I don't recall seeing why the I&W solution is better than the previous fix with metal. You used nails just as the previous did. Would nails with caulk on the penetration points on the metal have been a good long-term solution? (Just sending you softballs on my first posting).
Thx for the info....
Jan 30, 2011 AmazingFoamInsulatio Says:
You are so correct. To extend your quality craftmanship in all roofing jobs spray applied foam insulation to the underneath side of roof deck should be considered as standard. Home builders do not want the additional expense and will not offer it as a value engineered upgrade option.
Sep 7, 2010 MdRoofingServices Says:
You're right, BC, it seems that sometimes the design of the roofing system takes a back seat, especially in remodeling projects . . .
This particular roof system could have been designed without the "low slope" areas, for sure.
Thanks observing and understanding,
-Bill T-
Sep 2, 2010 BamaCivic Says:
Of course hindsight is always 20/20 but this roof system was poor design from the builder. It should have been given more thought for sure. Obviously you already know this but good repair all in all. Thanks for the info.
Jul 27, 2010 MdRoofingServices Says:
Thanks for the observations . . .
There was an identical area on the other side of the front of the home, so we wanted it to be aesthetically correct. I do agree that modified bitumen would have worked fine, but the flat part of the roof was over 2/12 pitch -- and met specifications.
It would have looked like putting "a black door on a white car" if we changed things around too much. The good news is that it's been over a year, and still dry.
Thanks!
-Bill T-
Jul 21, 2010 2miangels Says:
ON 2:14 SEC THE TRIANGLE DECKING LOOKS TOO SMALL ,WHY YOU DIDN'T CUT A BIGGER PIECE OF 3/4" PLYWOOD AND BUILT A BETTER SLOPE IF YOU WANTED TO INSTALL SHINGLES BACK.
BUT IF YOU WANTED TO LEAVE THE SAME PIECEOF DECKING , WHY U DIDN'T USE MODIFIED BITUMEN ON THE FLAT ROOF INSTEAD.?
IT LOOKS TOO FLAT TO ME
Feb 8, 2010 MdRoofingServices Says:
Yeah? Please tell me how that would work.
-Bill T-
Feb 8, 2010 mklflrndo Says:
i would rather recommend an inside gutter
Jun 24, 2009 NGOSHE8R Says:
I agree it was informative, and maybe would only need a bit of backround music if you didnt want to voiceover, which most slode programs would be capable of doing.
Thanks for takin the time to fill us in!
B
Feb 11, 2009 rasta420raiders Says:
good video thatnks man. needs audio though
Nov 22, 2008 baseballgrader Says:
Very nice video man Nice job editing
Video Details
Another video of an actual roof repair by http://www.MdRoofingServices.com with a hot roofing tip.
"Low Slope" (roofing slopes of less than 4:12)roof areas can be a source of interior leaks for shingle roofs -- mainly because many roofers just don't know how to properly install shingles in suc... More
Another video of an actual roof repair by http://www.MdRoofingServices.c om with a hot roofing tip.
"Low Slope" (roofing slopes of less than 4:12)roof areas can be a source of interior leaks for shingle roofs -- mainly because many roofers just don't know how to properly install shingles in such a gradual slope situation.
In our actual example, the origingal roofer lined the area with aluminum flashing -- not a bad thought except for the fact that he "peppered" the flashing with about 200 nails. The result: Interior leakage and drywall damage.
Take a look as we take you by the hand, diagnose the problem, and then use Certainteed's WinterGuard -- their "ice and water shield" low slope underlayment -- to help fix the leak and solve the homeowners problems.
For more information and more roofing tips, tricks, and techniques, please visit us at http://www.MdRoofingServices.c omLess
adszicom: For Rent House in Phoenix Ready to Move IN! (2808 N 59th Lane Phoenix, AZ 85035): For Rent House in Phoenix Rea... http://t.co/LX3YVf05View Tweet
Post a comment
Local Comments (0)
Youtube Comments (13)
MdRoofingServices Says:
Thanks for the comment. Caulking over nail heads almost always fails over time -- and the temperature swing of shingles over metal causes the metal to reach very high temps -- causing expansion and contraction -- and bigger holes where the nail penetrates the aluminum. This develops into a big leak over time. The Ice and Water actually remains soft and sticky and seals to the nail shafts, eliminating future leaks. Hope it helps! -Bill T-
appliaroofNtx Says:
I don't recall seeing why the I&W solution is better than the previous fix with metal. You used nails just as the previous did. Would nails with caulk on the penetration points on the metal have been a good long-term solution? (Just sending you softballs on my first posting). Thx for the info....
AmazingFoamInsulatio Says:
You are so correct. To extend your quality craftmanship in all roofing jobs spray applied foam insulation to the underneath side of roof deck should be considered as standard. Home builders do not want the additional expense and will not offer it as a value engineered upgrade option.
MdRoofingServices Says:
You're right, BC, it seems that sometimes the design of the roofing system takes a back seat, especially in remodeling projects . . . This particular roof system could have been designed without the "low slope" areas, for sure. Thanks observing and understanding, -Bill T-
BamaCivic Says:
Of course hindsight is always 20/20 but this roof system was poor design from the builder. It should have been given more thought for sure. Obviously you already know this but good repair all in all. Thanks for the info.
MdRoofingServices Says:
Thanks for the observations . . . There was an identical area on the other side of the front of the home, so we wanted it to be aesthetically correct. I do agree that modified bitumen would have worked fine, but the flat part of the roof was over 2/12 pitch -- and met specifications. It would have looked like putting "a black door on a white car" if we changed things around too much. The good news is that it's been over a year, and still dry. Thanks! -Bill T-
2miangels Says:
ON 2:14 SEC THE TRIANGLE DECKING LOOKS TOO SMALL ,WHY YOU DIDN'T CUT A BIGGER PIECE OF 3/4" PLYWOOD AND BUILT A BETTER SLOPE IF YOU WANTED TO INSTALL SHINGLES BACK. BUT IF YOU WANTED TO LEAVE THE SAME PIECEOF DECKING , WHY U DIDN'T USE MODIFIED BITUMEN ON THE FLAT ROOF INSTEAD.? IT LOOKS TOO FLAT TO ME
2miangels Says:
THAT'S FUNNY ,INSIDE GUTTER?
MdRoofingServices Says:
Yeah? Please tell me how that would work. -Bill T-
mklflrndo Says:
i would rather recommend an inside gutter
NGOSHE8R Says:
I agree it was informative, and maybe would only need a bit of backround music if you didnt want to voiceover, which most slode programs would be capable of doing. Thanks for takin the time to fill us in! B
rasta420raiders Says:
good video thatnks man. needs audio though
baseballgrader Says:
Very nice video man Nice job editing